This kit is purely designed for sweeping 5", 6", 7" & 8" flexible steel, twin wall, clay liners, pumice liners and small flues.°.

This system is highly efficient, and it takes less than 30 seconds to connect all the stainless steel, double button lock rods together.°.

These rods are highly flexible and are ideal for sweeping a liner through a stove, where there is a 90° bend and come with a bag to keep them safe between sweeps.

This kit will go up to 10 metres in height, but additional rods can be purchased to extend this further.

The heads (ferrules) of the rods are made of Stainless Steel, so they do not corrode. The ferrules are also quadruple crimped at each end onto the 12mm solid nylon rod.°.

This kit can also be used for manual chimney sweeping, by connecting the SnapLok rods to a SnapLok to Whitworth adaptor and onto a liner brush if necessary.

Included in the kit is a 9" SnapLok Bullet Whip Head of which the line length can be adjusted easily by removing the screw in the base of the head to allow the whip line to be replaced for a different size.°?

All the rods are white in colour and we purposely do not make a lead rod, as we feel that this creates a weakness in the kit.

Using the same rod as a lead rod every time makes that one lead rod very weak after a period of time, and in our experience using other systems can lead to a breakage of the lead rod.

Rotating all the rods in the kit is the preferred method of Power Sweeping.

This kit includes

• 11 x 12mm - 90cm Solid Nylon Rods - Aluminium Ferrules
• 1 x 9"/230mm Bullet Whip Head
• 1 x SnapLok Large Drill Adaptor
• 1 x SnapLok Hex Key (For changing whip line)
• 1 x SnapLok 3ft Rod Caddy Bag

To see the full SnapLok Rotary Power Sweeping Range click here.

To see our full range of Chimney Sweep Equipment click here

If you have any questions about your purchase please don't hesitate to send us a message through our contact page.